2020年6月1日 星期一
热烈庆祝深润化工官方网站投入运行
 
管根套垫
 
 
发布日期:2014-06-01   浏览:1449次
 
 

管根套垫

 

 

 

预制管道泛水

Prefabricated Pipe Flashing

 

1.说明(Description

预制管道泛水是专门用于50mm 150mm 的圆形穿孔的泛水、它是一个预制的管靴子。每一个预制管道泛水将适用于不同大小的圆形穿孔,在安装前应该依据正确的管道直径来对其进行切割。

Penetration Flashings are specifically designed for flashing round penetrations with a diameter between 50mm and 150mm . Penetration Flashings will fit various penetrations and must be cut to correct pipe diameter before installation.

 

2.准备(Prepartion)

做泛水之前穿孔部位必须清洁,涂刷基层处理剂。

Clean the EPDM membrane using substrate treating agent to remove all dusting agents, dirt and other contaminants that will affect the finished bond.

 

3.应用(Application)

用预制管道泛水上依据管道的尺寸沿着顶部边缘进行切割。按照详图安装管道泛水、固定环和外密封膏。

Cut along the top edge of the ring on the Penetration Flashing corresponding to the size of the pipe. Install the pipe flashing , clamping ring and Lap Sealant according to installation guide.

 

4.用量(Usage)

每个穿孔一个

Perforate each pipe flashing.

 

5.特性(Characteristic)

技术特性(Technical Characteristics)

 

 

规格(Specifications )

 

 

6.包装(Package)

包装:每纸板箱10 个。

Package:10PC/container

 
 
 
COPYRIGHT www.sr-chemical.com ALL RIGHTS RESERVED 客服热线4006213077 黑ICP备13005271号-1
最佳解析度 瀏覽尺寸 1920x1080